23183 No formaldehyde dyeing auxiliaries eco-friendly textile chemical agent improve color fastness high concentration fixing agent for cotton fabrics hot selling

We have now probably the most innovative production equipment, experienced and qualified engineers and workers, regarded high quality control systems and also a friendly expert income team pre/after-sales support for 23183 No formaldehyde dyeing auxiliaries eco-friendly textile chemical agent improve color fastness high concentration fixing agent for cotton fabrics hot selling, Presently, we are searching ahead to even greater cooperation with abroad prospects determined by mutual benefits. Please experience free to make contact with us for more facts.
We have now probably the most innovative production equipment, experienced and qualified engineers and workers, regarded high quality control systems and also a friendly expert income team pre/after-sales support for China chemical for textile, Dyeing agent, Dyeing auxiliary, Fabric agent, Fastness improving agent, Fixing Agent, Textile Chemical, Custom orders are acceptable with different quality grade and customer’s especial design. We’ve been looking forward to establish the good and successful cooperation in business with long terms from the customers of all over the world.
Features & Benefits

1. Contains no formaldehyde, etc. Fits environmental protection requirements.
2. Significantly improves washing color fastness, perspiration color fastness, wet rubbing color fastness of direct dyes and reactive dyes. Not influences light fastness.
3. Obviously improves the washing color fastness, perspiration color fastness and soaking color fastness of reactive turquoise blue and green.
4. Has a certain effect on correcting color shade.
5. Extremely little color fading.
6. Can be used together with cationic or nonionic softener directly in same bath process.
7. Cost-effective.

Typical Properties

Package

120kg plastic barrel, IBC tank & customized package available for selection

TIPS:

Exhaust dyeing

Exhaust dyeing recipes, including auxiliaries together with the dyes, are traditionally made up by percent weight relative to the weight of substrate being dyed. The auxiliaries are introduced first into the dyebath and allowed to circulate to enable uniform concentration throughout the dyebath and on the substrate surface. The dyes are then introduced into the dyebath and again allowed to circulate before the temperature is raised in order to obtain a uniform concentration throughout the dyebath. Gaining uniform concentrations of both auxiliaries and dyes is paramount since non-uniform concentrations on the substrate surface can lead to unlevel dye uptake. The speed of dye uptake (exhaustion) of individual dyes can vary and will depend upon their chemical and physical properties together with the type and construction of substrate being dyed. The dyeing rate also depends upon the dye concentration, the liquor ratio, temperature of the dyebath and the influence of the dyeing auxiliaries. Rapid exhaustion rates lead to unlevelness of dye distribution over the substrate surface, so dyes have to be carefully selected when used in multi-dye recipes; many dye manufacturers produce information stating which dyes from their ranges are compatible to achieve level build-up of dye during dyeing. Dyers wish to achieve the highest exhaustion possible to minimize dye remaining in the effluent and increase batch to batch reproducibility, whilst still obtaining the shade required by the customer. The dyeing process will eventually end in equilibrium, whereby the dye concentration in the fiber and the dyebath do not change significantly. It is envisaged that dye adsorbed onto the substrate surface has diffused into the whole of the substrate resulting in a uniform shade required by the customer and that there is only a small concentration of dye left in the dyebath. This is where the final shade of the substrate is checked against the standard. If there is any deviation from the required shade, small additions of dye may be made to the dyebath to achieve the required shade.

Dyers wish to achieve the correct shade the first time of dyeing in order to minimize further processing and reduce costs. In order to do this uniform dyeing rates and high exhaustion rates of dyes are required. To achieve short dyeing cycles, thereby maximizing production, most modern dyeing equipment is enclosed ensuring that the dyebath is maintained at the required temperature and that there are no temperature variations within the dyebath. Some dyeing machines can be pressurized enabling the dye liquor to be heated to 130°C allowing substrates, such as polyester, to be dyed without the requirement of carriers.

There are two types of machinery available for exhaust dyeing: circulating machines whereby the substrate is stationary and the dye liquor is circulated, and circulating-goods machines in which the substrate and the dye liquor are circulated.